165,75 € tax incl.
195,00 €
-15%
-4
Direct factory!
Sold in pairs.
Thickness in mm (coating): 20 mm
total width by axles: 40 mm
Distance between centers: 108x5
Moyeu diameter (Aisage): 63.3 mm
Fastening thread: M12x1.5
Colori des cales : Anodized black
Screws included
With rim centerer
Fixing system: Double bolt
Fixing system by studs
Type of system Eibach 4
kit reference : S90-4-20-008-B
Example of compatible vehicles:
FORD C-MAX (DM2) 02.07 -
FORD C-MAX II 12.10 -
FORD FOCUS C-MAX 10.03 - 03.07
FORD FOCUS II (DA_) 11.04 -
FORD FOCUS II STUFENHECK (DA_) / FOCUS II SALOON (DA_) 04.05 -
FORD FOCUS II KOMBI (DA_) / FOCUS II ESTATE (DA_) 11.04 - 09.12
FORD FOCUS II CABRIOLET (DB3) / FOCUS II CONVERTIBLE (DB3) 10.06 -
FORD FOCUS III 04.11 -
FORD FOCUS III VAN 04.11 -
FORD FOCUS III STUFENHECK / FOCUS III STUFENHECK 04.11 -
FORD FOCUS III TURNIER 05.11 -
FORD FOCUS IV (HN) 01.18 -
FORD FOCUS BERLINE 01.18 -
FORD FOCUS IV TURNIER (HP) / FOCUS STATION WAGON (HP) 01.18 -
FORD GRAND C-MAX (DXA/CB7, DXA/CEU) 12.10 -
FORD KUGA I 03.08 -
FORD KUGA II (DM2) 05.12 -
FORD KUGA II VAN 05.12 -
FORD MONDEO III (B5Y) 11.00 -
FORD MONDEO III STUFENHECK (B4Y, B5Y) / MONDEO III SALOON (B4Y, B5Y) 11.00 - 03.07
FORD MONDEO III TURNIER (BWY) / MONDEO III STATION WAGON (BWY) 11.00 - 03.07
FORD MONDEO IV (BA7) 03.07 -
FORD MONDEO IV STUFENHECK (BA7) / MONDEO IV SALOON (BA7) 03.07 -
FORD MONDEO IV TURNIER (BA7) / MONDEO IV STATION WAGON (BA7) 03.07 -
FORD MONDEO V 01.13 -
FORD MONDEO V STUFENHECK / MONDEO V SALOON 09.14 -
FORD MONDEO V TURNIER / MONDEO V STATION WAGON 09.14 -
JAGUAR F-TYPE COUPE (QQ6) 10.13 -
JAGUAR F-TYPE CABRIOLET (Q6) 10.12 -
VOLVO C30 12.06 - 12.12
VOLVO C 70 II CABRIOLET / C 70 II CONVERTIBLE 03.06 -
VOLVO S40 II (MS) 01.04 -
VOLVO V40 SCHRÄGHECK / V40 HATCHBACK 03.12 -
VOLVO V50 (MW) 04.04 -
Be careful to take this technical information into account before ordering! In case of doubt, our team remains at your disposal to refine your research!
Technical Notes: Make sure you have behind your rims wells allowing the studs that exceed to lodge in. Without that, they're gonna hit the rim and grab you from screwing her.
Mounting only if rims in Alu
A question about compatibility, fixing your hold? Need to find the right visserie? Contact us
Additional note:
For users of Rumble Bars, threaded combos, short springs, or low suspensions, wheel chock mounting may be required. Spring lowering is always given on a standard chassis basis. If you have a sport chassis option, the lowering of this one will be deducted. The same goes for special equipment (4x4, leather, 3 doors, auto gearbox...etc...) the lowering can sometimes vary by a few millimeters because of the extra weight. The lowerings are never perfectly identical to the millimeter, no need to go looking for the detail with the caliper, of course.
Reminder: If your vehicle is equipped with wheel studs, measure the length of your studs before ordering. If you use thin wheel studs, the studs will protrude and prevent the installation of the rim. It will then be necessary to buy studs with a suitable length under the head because they are not supplied with the chocks.
Find our Antivols de roues, goujons longs, visseries de jantes in the dedicated section!
Materials: | Aluminium |
Filter the type of parts | Wheels: Wheels (all models combined) |
Filter the type of parts | Wheels: DOUBLE bolts (20mm) |
Thickness: | 20mm |
Colors: | Black anodized |
Wheel | Spacers |
Options de roues | Double boulonnerie |
Ref: S90-2-16-011-B
Ref: S90-1-05-032
Ref: S90-2-14-002
Ref: S90-1-07-006
Ref: S90-2-15-005
Ref: S90-2-20-004
Ref: S90-7-25-003
Ref: S90-2-12-013
Ref: S90-7-20-028
Ref: S90-2-10-034
Ref: S90-2-10-027
Ref: S90-2-10-027-B
Ref: S90-2-12-003
Ref: S90-2-15-013
Ref: S90-2-20-003
Ref: S90-2-12-003-B
Ref: S90-2-15-013-B
Ref: S90-2-20-003-B
Ref: S90-2-08-003
Ref: S90-2-08-003-B
Ref: S90-2-22-001
Ref: S90-2-22-001-B
Ref: S90-1-05-006
Ref: S90-1-08-001
Ref: S90-7-20-017
Ref: S90-7-25-005
Ref: S90-7-30-012
Ref: S90-7-20-017-B
Ref: S90-7-25-005-B
Ref: S90-1-05-016