Français
English GB
Audi TT Quattro 8S Coupé 2.0 TFSI (S) EU6d (320 hp) remapping
- Fuel
- Petrol
- Years
- 2014 - 2023
- ECU
- Continental Simos19.6
- Method
- Through the OBD port
Stage 1
Audi TT Quattro 8S Coupé 2.0 TFSI (S) EU6d (320 hp)
Power
+80 hp +25 %
Torque
+100 Nm +25 %
| Power | Torque | |
|---|---|---|
| Stock | 320 hp | 400 Nm |
| Stage 1 | 400 hp | 500 Nm |
| Gain | +80 hp | +100 Nm |
E85 FlexFuel conversion
Audi TT Quattro 8S Coupé 2.0 TFSI (S) EU6d (320 hp)
Power
+80 hp +25 %
Torque
+100 Nm +25 %
| Power | Torque | |
|---|---|---|
| Stock | 320 hp | 400 Nm |
| E85 | 400 hp | 500 Nm |
| Gain | +80 hp | +100 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other TT Quattro 8S Coupé engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 1.8 TSI / TFSI (180 hp) Petrol E85 compatible | 180 hp250 Nm | 220 hp320 Nm | +40 hp+70 Nm | |
| 40 TFSI (2.0) (197 hp) Petrol E85 compatible | 197 hp320 Nm | 240 hp380 Nm | +43 hp+60 Nm | |
| 2.0 TFSi 16V (230 hp ) Petrol E85 compatible | 231 hp350 Nm | 300 hp450 Nm | +69 hp+100 Nm | |
| 2.0 TFSI EU6 OPF (245 hp) Petrol E85 compatible | 245 hp370 Nm | 305 hp440 Nm | +60 hp+70 Nm | |
| 2.0 TFSI (S) (306 hp) Petrol E85 compatible | 306 hp400 Nm | 350 hp480 Nm | +44 hp+80 Nm | |
| 2.0 TFSI (S) EU6d (320 hp) Petrol E85 compatible | 320 hp400 Nm | 400 hp500 Nm | +80 hp+100 Nm | This page |
All TT Quattro 8S Coupé engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.