Français
English GB
Audi Q3 40 TDI (2.0) (200 hp) remapping
- Fuel
- Diesel
- Years
- 2018 - 2025
- ECU
- Bosch MD1CS004
- Method
- Through the OBD port
Stage 1
Audi Q3 40 TDI (2.0) (200 hp)
Power
+30 hp +15 %
Torque
+60 Nm +15 %
| Power | Torque | |
|---|---|---|
| Stock | 200 hp | 400 Nm |
| Stage 1 | 230 hp | 460 Nm |
| Gain | +30 hp | +60 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Q3 engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 35 TFSI (1.5) (150 hp) Petrol E85 compatible | 150 hp250 Nm | 175 hp300 Nm | +25 hp+50 Nm | |
| 40 TFSI (2.0) (190 hp) Petrol E85 compatible | 190 hp320 Nm | 300 hp420 Nm | +110 hp+100 Nm | |
| 45 TFSI (2.0) (230 hp) Petrol E85 compatible | 230 hp350 Nm | 280 hp420 Nm | +50 hp+70 Nm | |
| 45 TFSI (2.0) (245 hp) Petrol E85 compatible | 245 hp370 Nm | 330 hp480 Nm | +85 hp+110 Nm | |
| 35 TDI (2.0) (150 hp) Diesel | 150 hp340 Nm | 185 hp400 Nm | +35 hp+60 Nm | |
| 40 TDI (2.0) (190 hp) Diesel | 190 hp380 Nm | 225 hp460 Nm | +35 hp+80 Nm | |
| 40 TDI (2.0) (200 hp) Diesel | 200 hp400 Nm | 230 hp460 Nm | +30 hp+60 Nm | This page |
All Q3 engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.