Français
English GB
Audi Q7 (4M) 4.0 TFSI (507 hp) remapping
- Fuel
- Petrol
- Years
- since 2015
Stage 1
Audi Q7 (4M) 4.0 TFSI (507 hp)
Power
+103 hp +20 %
Torque
+60 Nm +8 %
| Power | Torque | |
|---|---|---|
| Stock | 507 hp | 770 Nm |
| Stage 1 | 610 hp | 830 Nm |
| Gain | +103 hp | +60 Nm |
E85 FlexFuel conversion
Audi Q7 (4M) 4.0 TFSI (507 hp)
Power
Torque
| Power | Torque | |
|---|---|---|
| Stock | 507 hp | 770 Nm |
The E85 figures for this engine are not published yet. The conversion lets you run on E85 bioethanol; a question before ordering? Contact us
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Q7 (4M) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 40 TFSI (2.0) (252 hp) Petrol E85 compatible | 252 hp370 Nm | 300 hp440 Nm | +48 hp+70 Nm | |
| 45 TFSI (2.0) MHEV (265 hp) Petrol E85 compatible | 265 hp | on request | ||
| 55 TFSI (3.0) (340 hp) Petrol E85 compatible | 340 hp500 Nm | 390 hp600 Nm | +50 hp+100 Nm | |
| 2.0 TFSI e-tron (367 hp) Hybrid | 367 hp | on request | ||
| 55 TFSI-e (381 hp) Hybrid | 381 hp600 Nm | 540 hp850 Nm | +159 hp+250 Nm | |
| 60 TFSI-e (456 hp) Hybrid | 456 hp700 Nm | 540 hp850 Nm | +84 hp+150 Nm | |
| 4.0 TFSI (507 hp) Petrol E85 compatible | 507 hp770 Nm | 610 hp830 Nm | +103 hp+60 Nm | This page |
| 3.0 TDI EU6 (Quattro) (211 hp) Diesel | 211 hp500 Nm | 310 hp650 Nm | +99 hp+150 Nm | |
| 45 TDI (3.0) (231 hp) Diesel | 231 hp500 Nm | 340 hp720 Nm | +109 hp+220 Nm | |
| 45 TDI (3.0) (245 hp) Diesel | 245 hp | on request | ||
| 50 TDI (3.0) (286 hp) Diesel | 286 hp600 Nm | 350 hp720 Nm | +64 hp+120 Nm | |
| 3.0 TDI (e-tron) (373 hp) Diesel | 373 hp700 Nm | 420 hp850 Nm | +47 hp+150 Nm |
All Q7 (4M) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.