Français
English GB
Audi SQ7 (4M) 4.0 TFSI (507 hp) remapping
- Fuel
- Petrol
- Years
- since 2016
Stage 1
Audi SQ7 (4M) 4.0 TFSI (507 hp)
Power
+103 hp +20 %
Torque
+60 Nm +8 %
| Power | Torque | |
|---|---|---|
| Stock | 507 hp | 770 Nm |
| Stage 1 | 610 hp | 830 Nm |
| Gain | +103 hp | +60 Nm |
E85 FlexFuel conversion
Audi SQ7 (4M) 4.0 TFSI (507 hp)
Power
Torque
| Power | Torque | |
|---|---|---|
| Stock | 507 hp | 770 Nm |
The E85 figures for this engine are not published yet. The conversion lets you run on E85 bioethanol; a question before ordering? Contact us
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other SQ7 (4M) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 4.0 TFSI (507 hp) Petrol E85 compatible | 507 hp770 Nm | 610 hp830 Nm | +103 hp+60 Nm | This page |
| 4.0 TDI V8 (429 hp) Diesel | 435 hp900 Nm | 480 hp1000 Nm | +45 hp+100 Nm | |
| 4.0 TDI (435 hp) Diesel | 435 hp900 Nm | 480 hp1000 Nm | +45 hp+100 Nm |
All SQ7 (4M) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.