Français
English GB
Audi A3 (8V) 2.0 TFSI (310 hp) remapping
- Fuel
- Petrol
- Years
- 2012 - 2020
- ECU
- Continental Simos18.1 / Continental Simos18.2 / Continental Simos18.3 / Continental Simos18.6
- Method
- Through the OBD port
Stage 1
Audi A3 (8V) 2.0 TFSI (310 hp)
Power
+40 hp +13 %
Torque
+80 Nm +20 %
| Power | Torque | |
|---|---|---|
| Stock | 310 hp | 400 Nm |
| Stage 1 | 350 hp | 480 Nm |
| Gain | +40 hp | +80 Nm |
E85 FlexFuel conversion
Audi A3 (8V) 2.0 TFSI (310 hp)
Power
+40 hp +13 %
Torque
+80 Nm +20 %
| Power | Torque | |
|---|---|---|
| Stock | 310 hp | 400 Nm |
| E85 | 350 hp | 480 Nm |
| Gain | +40 hp | +80 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other A3 (8V) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 1.4 TFSI (150 hp) Petrol E85 compatible | 150 hp250 Nm | 180 hp300 Nm | +30 hp+50 Nm | |
| 1.8 TFSI (179 hp) Petrol E85 compatible | 180 hp250 Nm | 220 hp320 Nm | +40 hp+70 Nm | |
| 2.0 TFSI OPF (190 hp) Petrol E85 compatible | 190 hp320 Nm | 240 hp420 Nm | +50 hp+100 Nm | |
| 2.0 TFSI (220 hp) Petrol E85 compatible | 220 hp350 Nm | 260 hp420 Nm | +40 hp+70 Nm | |
| 2.0 TFSI (310 hp) Petrol E85 compatible | 310 hp400 Nm | 350 hp480 Nm | +40 hp+80 Nm | This page |
| 1.6 TDI (110 hp) Diesel | 110 hp250 Nm | 145 hp310 Nm | +35 hp+60 Nm | |
| 2.0 TDI (150 hp) Diesel | 150 hp340 Nm | 185 hp400 Nm | +35 hp+60 Nm | |
| 2.0 TDI (184 hp) Diesel | 184 hp380 Nm | 225 hp460 Nm | +41 hp+80 Nm |
All A3 (8V) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.