Français
English GB
Audi A5 Cabriolet (8F) 2.0 TFSI (225 hp) remapping
- Fuel
- Petrol
- Years
- 2009 - 2016
- ECU
- Continental Simos18.1 / Continental Simos18.2 / Continental Simos18.3 / Continental Simos18.6
- Method
- Through the OBD port
Stage 1
Audi A5 Cabriolet (8F) 2.0 TFSI (225 hp)
Power
+65 hp +29 %
Torque
+90 Nm +26 %
| Power | Torque | |
|---|---|---|
| Stock | 225 hp | 350 Nm |
| Stage 1 | 290 hp | 440 Nm |
| Gain | +65 hp | +90 Nm |
E85 FlexFuel conversion
Audi A5 Cabriolet (8F) 2.0 TFSI (225 hp)
Power
Torque
| Power | Torque | |
|---|---|---|
| Stock | 225 hp | 350 Nm |
The E85 figures for this engine are not published yet. The conversion lets you run on E85 bioethanol; a question before ordering? Contact us
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other A5 Cabriolet (8F) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 2.0 TFSI (225 hp) Petrol E85 compatible | 225 hp350 Nm | 290 hp440 Nm | +65 hp+90 Nm | This page |
| 2.0 TDI (150 hp) Diesel | 150 hp320 Nm | 185 hp420 Nm | +35 hp+100 Nm | |
| 3.0 TDI (211 hp) Diesel | 211 hp | on request | ||
| 3.0 TDI (245 hp) Diesel | 245 hp500 Nm | 300 hp620 Nm | +55 hp+120 Nm |
All A5 Cabriolet (8F) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.