Français
English GB
Audi A6 C8 (4A) 45 TDI (3.0) (231 hp) remapping
- Fuel
- Diesel
- Years
- 2018 - 2025
- ECU
- Bosch MD1CP004 / Bosch MD1CS014
- Method
- Through the OBD port
Stage 1
Audi A6 C8 (4A) 45 TDI (3.0) (231 hp)
Power
+109 hp +47 %
Torque
+220 Nm +44 %
| Power | Torque | |
|---|---|---|
| Stock | 231 hp | 500 Nm |
| Stage 1 | 340 hp | 720 Nm |
| Gain | +109 hp | +220 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other A6 C8 (4A) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 40 TFSI (2.0) (190 hp) Petrol E85 compatible | 190 hp320 Nm | 240 hp420 Nm | +50 hp+100 Nm | |
| 40 TFSI (2.0) MHEV (204 hp) Petrol E85 compatible | 204 hp | on request | ||
| 45 TFSI (2.0) (245 hp) Petrol E85 compatible | 245 hp370 Nm | 330 hp480 Nm | +85 hp+110 Nm | |
| 40 TFSI (2.0) (252 hp) Petrol E85 compatible | 252 hp | on request | ||
| 45 TFSI (2.0) MHEV (265 hp) Petrol E85 compatible | 265 hp370 Nm | 304 hp420 Nm | +39 hp+50 Nm | |
| 50 TFSIe (2.0) EU6d (299 hp) Hybrid | 299 hp | on request | ||
| 55 TFSI (3.0) (340 hp) Petrol E85 compatible | 340 hp500 Nm | 390 hp600 Nm | +50 hp+100 Nm | |
| 55 TFSI e (2.0) (367 hp) Hybrid | 367 hp500 Nm | 400 hp580 Nm | +33 hp+80 Nm | |
| 30 TDI (2.0) (136 hp) Diesel | 136 hp | on request | ||
| 35 TDI (2.0) (163 hp) Diesel | 163 hp370 Nm | 220 hp450 Nm | +57 hp+80 Nm | |
| 40 TDI (2.0) (204 hp) Diesel | 204 hp400 Nm | 250 hp480 Nm | +46 hp+80 Nm | |
| 45 TDI (3.0) (231 hp) Diesel | 231 hp500 Nm | 340 hp720 Nm | +109 hp+220 Nm | This page |
| 45 TDI (3.0) (245 hp) Diesel | 245 hp500 Nm | 350 hp720 Nm | +105 hp+220 Nm | |
| 50 TDI (3.0) (286 hp) Diesel | 286 hp620 Nm | 350 hp720 Nm | +64 hp+100 Nm | |
| 55 TDI (349 hp) Diesel | 349 hp700 Nm | 390 hp780 Nm | +41 hp+80 Nm |
All A6 C8 (4A) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.