Français
English GB
BMW Série 2 (F22) Coupé 220i (2.0T) EU6d (197 hp) remapping
- Fuel
- Petrol
- Years
- 2013 - 2021
- ECU
- Bosch MG1CS201
- Method
- Through the OBD port
Stage 1
BMW Série 2 (F22) Coupé 220i (2.0T) EU6d (197 hp)
Power
+103 hp +52 %
Torque
+120 Nm +38 %
| Power | Torque | |
|---|---|---|
| Stock | 197 hp | 320 Nm |
| Stage 1 | 300 hp | 440 Nm |
| Gain | +103 hp | +120 Nm |
E85 FlexFuel conversion
BMW Série 2 (F22) Coupé 220i (2.0T) EU6d (197 hp)
Power
+103 hp +52 %
Torque
+120 Nm +38 %
| Power | Torque | |
|---|---|---|
| Stock | 197 hp | 320 Nm |
| E85 | 300 hp | 440 Nm |
| Gain | +103 hp | +120 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Série 2 (F22) Coupé engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 216i (1.5T) (102 hp) Petrol E85 compatible | 102 hp180 Nm | 175 hp250 Nm | +73 hp+70 Nm | |
| 216i (1.5T) (109 hp) Petrol E85 compatible | 109 hp180 Nm | 175 hp250 Nm | +66 hp+70 Nm | |
| 218i (136 hp) Petrol E85 compatible | 136 hp220 Nm | 175 hp260 Nm | +39 hp+40 Nm | |
| 220i (184 hp) Petrol E85 compatible | 184 hp270 Nm | 260 hp380 Nm | +76 hp+110 Nm | |
| 220i (2.0T) EU6d (197 hp) Petrol E85 compatible | 197 hp320 Nm | 300 hp440 Nm | +103 hp+120 Nm | This page |
| 228i (231 hp) Petrol E85 compatible | 231 hp350 Nm | 266 hp410 Nm | +35 hp+60 Nm | |
| 228i (245 hp) Petrol E85 compatible | 245 hp350 Nm | 280 hp420 Nm | +35 hp+70 Nm | |
| 230i (245 hp) Petrol E85 compatible | 245 hp350 Nm | 280 hp420 Nm | +35 hp+70 Nm | |
| M235i N54 Twinturbo (326 hp) Petrol E85 compatible | 326 hp450 Nm | 380 hp520 Nm | +54 hp+70 Nm | |
| M240i (340 hp) Petrol E85 compatible | 340 hp500 Nm | 420 hp580 Nm | +80 hp+80 Nm | |
| 214d (1.5) (95 hp) Diesel | 95 hp235 Nm | 140 hp320 Nm | +45 hp+85 Nm | |
| 218d (136/150 hp) Diesel | 150 hp360 Nm | 180 hp400 Nm | +30 hp+40 Nm | |
| 220d (163 hp) Diesel | 163 hp400 Nm | 225 hp460 Nm | +62 hp+60 Nm | |
| 220d (163/190 hp) Diesel | 190 hp400 Nm | 225 hp460 Nm | +35 hp+60 Nm | |
| 220d (perf.) (200 hp) Diesel | 200 hp420 Nm | 230 hp480 Nm | +30 hp+60 Nm | |
| 225d (224 hp) Diesel | 224 hp450 Nm | 270 hp500 Nm | +46 hp+50 Nm |
All Série 2 (F22) Coupé engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.