Français
English GB
Ford Tourneo Connect 1.5 EcoBlue (75 hp) remapping
- Fuel
- Diesel
- Years
- since 2014
- ECU
- Bosch MD1CS005
- Method
- Through the OBD port
Stage 1
Ford Tourneo Connect 1.5 EcoBlue (75 hp)
Power
+20 hp +27 %
Torque
+75 Nm +34 %
| Power | Torque | |
|---|---|---|
| Stock | 75 hp | 220 Nm |
| Stage 1 | 95 hp | 295 Nm |
| Gain | +20 hp | +75 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Tourneo Connect engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 1.5 T (114 hp) Petrol E85 compatible | 114 hp220 Nm | 175 hp300 Nm | +61 hp+80 Nm | |
| 1.5 EcoBlue (75 hp) Diesel | 75 hp220 Nm | 95 hp295 Nm | +20 hp+75 Nm | This page |
| 1.5 EcoBlue (100 hp) Diesel | 100 hp215 Nm | 120 hp275 Nm | +20 hp+60 Nm | |
| 2.0 EcoBlue (102 hp) Diesel | 102 hp | on request | ||
| 1.5 EcoBlue (120 hp) Diesel | 120 hp300 Nm | 155 hp360 Nm | +35 hp+60 Nm | |
| 2.0 EcoBlue (122 hp) Diesel | 122 hp320 Nm | 190 hp420 Nm | +68 hp+100 Nm |
All Tourneo Connect engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.