Français
English GB
Mercedes Classe GLS (X166) 350 BlueTec (3.0) (258 hp) remapping
- Fuel
- Diesel
- Years
- 2016 - 2019
- ECU
- Bosch EDC17CP57
- Method
- Through the OBD port
Stage 1
Mercedes Classe GLS (X166) 350 BlueTec (3.0) (258 hp)
Power
+42 hp +16 %
Torque
+80 Nm +13 %
| Power | Torque | |
|---|---|---|
| Stock | 258 hp | 620 Nm |
| Stage 1 | 300 hp | 700 Nm |
| Gain | +42 hp | +80 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Classe GLS (X166) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 400 EU6 (3.0T) (333 hp) Petrol E85 compatible | 333 hp480 Nm | 400 hp580 Nm | +67 hp+100 Nm | |
| 500 EU6 (4.7T) (455 hp) Petrol E85 compatible | 455 hp700 Nm | 500 hp800 Nm | +45 hp+100 Nm | |
| 63 AMG (5.5T) (585 hp) Petrol E85 compatible | 585 hp900 Nm | 660 hp1150 Nm | +75 hp+250 Nm | |
| 350 BlueTec (3.0) (258 hp) Diesel | 258 hp620 Nm | 300 hp700 Nm | +42 hp+80 Nm | This page |
All Classe GLS (X166) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.