Français
English GB
Mercedes Classe E (W213) Berline 43 AMG (3.0T) (367 hp) remapping
- Fuel
- Petrol
- Years
- 2016 - 2023
- ECU
- Bosch MED17.7.3.1
- Method
- Through the OBD port
Stage 1
Mercedes Classe E (W213) Berline 43 AMG (3.0T) (367 hp)
Power
+43 hp +12 %
Torque
+80 Nm +15 %
| Power | Torque | |
|---|---|---|
| Stock | 367 hp | 520 Nm |
| Stage 1 | 410 hp | 600 Nm |
| Gain | +43 hp | +80 Nm |
E85 FlexFuel conversion
Mercedes Classe E (W213) Berline 43 AMG (3.0T) (367 hp)
Power
Torque
| Power | Torque | |
|---|---|---|
| Stock | 367 hp | 520 Nm |
The E85 figures for this engine are not published yet. The conversion lets you run on E85 bioethanol; a question before ordering? Contact us
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Classe E (W213) Berline engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 180 EU6 (1.6T) (156 hp) Petrol E85 compatible | 156 hp250 Nm | 175 hp300 Nm | +19 hp+50 Nm | |
| 200 (184 hp) Petrol E85 compatible | 184 hp270 Nm | 245 hp400 Nm | +61 hp+130 Nm | |
| 250 (211 hp) Petrol E85 compatible | 211 hp350 Nm | 245 hp400 Nm | +34 hp+50 Nm | |
| 300 (245 hp) Petrol E85 compatible | 245 hp400 Nm | 265 hp420 Nm | +20 hp+20 Nm | |
| 320 (3.0T) (272 hp) Petrol E85 compatible | 272 hp400 Nm | 420 hp550 Nm | +148 hp+150 Nm | |
| 400 EU6 (3.5T) (333 hp) Petrol E85 compatible | 333 hp480 Nm | 420 hp550 Nm | +87 hp+70 Nm | |
| 43 AMG (3.0T) (367 hp) Petrol E85 compatible | 367 hp520 Nm | 410 hp600 Nm | +43 hp+80 Nm | This page |
| 43 AMG (3.0T) (401 hp) Petrol E85 compatible | 401 hp520 Nm | 444 hp600 Nm | +43 hp+80 Nm | |
| 63 AMG S (4.0T) (612 hp) Petrol E85 compatible | 612 hp850 Nm | 670 hp1000 Nm | +58 hp+150 Nm | |
| 220d (163 hp) Diesel | 163 hp400 Nm | 215 hp480 Nm | +52 hp+80 Nm | |
| 350 BlueTec (3.0) (258 hp) Diesel | 258 hp620 Nm | 300 hp700 Nm | +42 hp+80 Nm |
All Classe E (W213) Berline engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.