Français
English GB
Mercedes Classe S (W222) 63 AMG S (4.0T) (612 hp) remapping
- Fuel
- Petrol
- Years
- 2013 - 2020
- ECU
- Bosch MED17.7.5
- Method
- Through the OBD port
Stage 1
Mercedes Classe S (W222) 63 AMG S (4.0T) (612 hp)
Power
+58 hp +9 %
Torque
+150 Nm +18 %
| Power | Torque | |
|---|---|---|
| Stock | 612 hp | 850 Nm |
| Stage 1 | 670 hp | 1000 Nm |
| Gain | +58 hp | +150 Nm |
E85 FlexFuel conversion
Mercedes Classe S (W222) 63 AMG S (4.0T) (612 hp)
Power
Torque
| Power | Torque | |
|---|---|---|
| Stock | 612 hp | 850 Nm |
The E85 figures for this engine are not published yet. The conversion lets you run on E85 bioethanol; a question before ordering? Contact us
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Classe S (W222) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 320 (3.0T) (272 hp) Petrol E85 compatible | 272 hp400 Nm | 420 hp550 Nm | +148 hp+150 Nm | |
| 400 Hybrid (3.5i) (306 hp) Hybrid | 306 hp370 Nm | 330 hp400 Nm | +24 hp+30 Nm | |
| 400 (333 hp) Petrol E85 compatible | 333 hp480 Nm | 400 hp580 Nm | +67 hp+100 Nm | |
| 500 Plug-In Hybrid (333 hp) Hybrid E85 compatible | 333 hp480 Nm | 400 hp580 Nm | +67 hp+100 Nm | |
| 400 (367 hp) Petrol E85 compatible | 367 hp520 Nm | 410 hp600 Nm | +43 hp+80 Nm | |
| 550 EU6 (4.7T) (408 hp) Petrol E85 compatible | 408 hp600 Nm | 500 hp800 Nm | +92 hp+200 Nm | |
| 500 Plug-in Hybrid (3.0T) (442 hp) Hybrid | 442 hp650 Nm | 480 hp710 Nm | +38 hp+60 Nm | |
| 500 EU6 (4.7T) (455 hp) Petrol E85 compatible | 455 hp700 Nm | 500 hp800 Nm | +45 hp+100 Nm | |
| 560 EU6 (4.0T) (463 hp) Petrol E85 compatible | 463 hp700 Nm | 550 hp800 Nm | +87 hp+100 Nm | |
| 600 V12 (6.0T) (523 hp) Petrol E85 compatible | 523 hp830 Nm | 600 hp1000 Nm | +77 hp+170 Nm | |
| 63 AMG S (5.5T) (585 hp) Petrol E85 compatible | 585 hp760 Nm | 650 hp950 Nm | +65 hp+190 Nm | |
| 63 AMG S (4.0T) (612 hp) Petrol E85 compatible | 612 hp850 Nm | 670 hp1000 Nm | +58 hp+150 Nm | This page |
| 65 AMG V12 (6.0T) (630 hp) Petrol E85 compatible | 630 hp1000 Nm | 680 hp1150 Nm | +50 hp+150 Nm | |
| 300 BlueTEC Hybrid (2.1) (231 hp) Diesel | 231 hp540 Nm | 260 hp600 Nm | +29 hp+60 Nm | |
| 350 BlueTec (3.0) (258 hp) Diesel | 258 hp620 Nm | 300 hp700 Nm | +42 hp+80 Nm |
All Classe S (W222) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.