Français
English GB
MINI MINI (R56) 1.6 Cooper S JCW (218 hp) remapping
- Fuel
- Petrol
- Years
- 2006 - 2010
- ECU
- Bosch MEVD17.2.2
- Method
- datalogs_beta
Stage 1
MINI MINI (R56) 1.6 Cooper S JCW (218 hp)
Power
+20 hp +9 %
Torque
+60 Nm +21 %
| Power | Torque | |
|---|---|---|
| Stock | 218 hp | 280 Nm |
| Stage 1 | 238 hp | 340 Nm |
| Gain | +20 hp | +60 Nm |
E85 FlexFuel conversion
MINI MINI (R56) 1.6 Cooper S JCW (218 hp)
Power
Torque
| Power | Torque | |
|---|---|---|
| Stock | 218 hp | 280 Nm |
The E85 figures for this engine are not published yet. The conversion lets you run on E85 bioethanol; a question before ordering? Contact us
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other MINI (R56) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 1.4 DFI 16v (75 hp) Petrol E85 compatible | 75 hp120 Nm | 105 hp150 Nm | +30 hp+30 Nm | |
| 1.4 One (95 hp) Petrol E85 compatible | 95 hp140 Nm | 105 hp150 Nm | +10 hp+10 Nm | |
| 1.6 One (98 hp) Petrol E85 compatible | 98 hp153 Nm | 130 hp175 Nm | +32 hp+22 Nm | |
| 1.6 T (163 hp) Petrol E85 compatible | 163 hp240 Nm | 189 hp320 Nm | +26 hp+80 Nm | |
| 1.6 Cooper S (184 hp) Petrol E85 compatible | 184 hp240 Nm | 210 hp320 Nm | +26 hp+80 Nm | |
| 1.6 Cooper S JCW (211 hp) Petrol E85 compatible | 211 hp270 Nm | 230 hp340 Nm | +19 hp+70 Nm | |
| 1.6 Cooper S JCW (218 hp) Petrol E85 compatible | 218 hp280 Nm | 238 hp340 Nm | +20 hp+60 Nm | This page |
| 1.6 D One (90 hp) Diesel | 90 hp215 Nm | 140 hp320 Nm | +50 hp+105 Nm | |
| 1.5 D (95 hp) Diesel | 95 hp220 Nm | 135 hp310 Nm | +40 hp+90 Nm | |
| 1.6 D Cooper (110 hp) Diesel | 112 hp270 Nm | 140 hp320 Nm | +28 hp+50 Nm | |
| 1.6 D Cooper (112 hp) Diesel | 112 hp270 Nm | 140 hp320 Nm | +28 hp+50 Nm | |
| 2.0d (112 hp) Diesel | 112 hp270 Nm | 180 hp380 Nm | +68 hp+110 Nm | |
| 1.6 D Cooper (114 hp) Diesel | 112 hp270 Nm | 140 hp320 Nm | +28 hp+50 Nm | |
| 2.0 D Cooper (143 hp) Diesel | 143 hp305 Nm | 180 hp380 Nm | +37 hp+75 Nm |
All MINI (R56) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.