Français
English GB
MINI MINI 3 (F56) 1.5T EU6d (102 hp) remapping
- Fuel
- Petrol
- Years
- 2014 - 2024
- ECU
- Bosch MG1CS201
- Method
- Through the OBD port
Stage 1
MINI MINI 3 (F56) 1.5T EU6d (102 hp)
Power
+73 hp +72 %
Torque
+70 Nm +37 %
| Power | Torque | |
|---|---|---|
| Stock | 102 hp | 190 Nm |
| Stage 1 | 175 hp | 260 Nm |
| Gain | +73 hp | +70 Nm |
E85 FlexFuel conversion
MINI MINI 3 (F56) 1.5T EU6d (102 hp)
Power
+73 hp +72 %
Torque
+70 Nm +37 %
| Power | Torque | |
|---|---|---|
| Stock | 102 hp | 190 Nm |
| E85 | 175 hp | 260 Nm |
| Gain | +73 hp | +70 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other MINI 3 (F56) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 1.2 One (75 hp) Petrol E85 compatible | 75 hp150 Nm | 125 hp230 Nm | +50 hp+80 Nm | |
| 1.5T EU6d (75 hp) Petrol E85 compatible | 75 hp | on request | ||
| 1.2 One (102 hp) Petrol E85 compatible | 102 hp180 Nm | 125 hp230 Nm | +23 hp+50 Nm | |
| 1.5T EU6d (102 hp) Petrol E85 compatible | 102 hp190 Nm | 175 hp260 Nm | +73 hp+70 Nm | This page |
| 1.5 Cooper (136 hp) Petrol E85 compatible | 136 hp220 Nm | 175 hp260 Nm | +39 hp+40 Nm | |
| 2.0T (163 hp) Petrol E85 compatible | 163 hp280 Nm | 250 hp380 Nm | +87 hp+100 Nm | |
| 2.0 Cooper S (192 hp) Petrol E85 compatible | 192 hp280 Nm | 250 hp380 Nm | +58 hp+100 Nm | |
| 2.0T JCW Pro (Kit) (211 hp) Petrol E85 compatible | 211 hp300 Nm | 270 hp380 Nm | +59 hp+80 Nm | |
| 2.0 Cooper S JCW (231 hp) Petrol E85 compatible | 231 hp320 Nm | 270 hp370 Nm | +39 hp+50 Nm | |
| 2.0T (JCW) GPF (306 hp) Petrol E85 compatible | 306 hp450 Nm | 336 hp500 Nm | +30 hp+50 Nm | |
| 1.5 One D (95 hp) Diesel | 95 hp220 Nm | 135 hp310 Nm | +40 hp+90 Nm | |
| 1.5 D Cooper (116 hp) Diesel | 116 hp270 Nm | 150 hp330 Nm | +34 hp+60 Nm | |
| 2.0 Cooper D (150 hp) Diesel | 150 hp320 Nm | 190 hp400 Nm | +40 hp+80 Nm | |
| 2.0 Cooper SD (170 hp) Diesel | 170 hp360 Nm | 220 hp450 Nm | +50 hp+90 Nm |
All MINI 3 (F56) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.