Français
English GB
Opel Insignia B 1.6 Turbo D (120 hp) remapping
- Fuel
- Diesel
- Years
- 2017 - 2022
- ECU
- Delco E80
- Method
- Through the OBD port
Stage 1
Opel Insignia B 1.6 Turbo D (120 hp)
Power
+20 hp +17 %
Torque
+80 Nm +27 %
| Power | Torque | |
|---|---|---|
| Stock | 120 hp | 300 Nm |
| Stage 1 | 140 hp | 380 Nm |
| Gain | +20 hp | +80 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Insignia B engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 1.5T (140 hp) Petrol E85 compatible | 140 hp250 Nm | 180 hp290 Nm | +40 hp+40 Nm | |
| 1.4 T (CVT) (145 hp) Petrol E85 compatible | 145 hp236 Nm | 175 hp280 Nm | +30 hp+44 Nm | |
| 1.5T (165 hp) Petrol E85 compatible | 165 hp250 Nm | 200 hp350 Nm | +35 hp+100 Nm | |
| 2.0 Turbo (200 hp) Petrol E85 compatible | 200 hp350 Nm | 230 hp420 Nm | +30 hp+70 Nm | |
| 2.0 Turbo (230 hp) Petrol E85 compatible | 230 hp350 Nm | 280 hp430 Nm | +50 hp+80 Nm | |
| 2.0 Turbo (260 hp) Petrol E85 compatible | 260 hp400 Nm | 310 hp485 Nm | +50 hp+85 Nm | |
| 1.6 CDTI (110 hp) Diesel | 110 hp300 Nm | 140 hp350 Nm | +30 hp+50 Nm | |
| 1.6 Turbo D (120 hp) Diesel | 120 hp300 Nm | 140 hp380 Nm | +20 hp+80 Nm | This page |
| 1.6 Turbo D (136 hp) Diesel | 136 hp320 Nm | 170 hp400 Nm | +34 hp+80 Nm | |
| 2.0 Turbo D (170 hp) Diesel | 170 hp400 Nm | 200 hp450 Nm | +30 hp+50 Nm | |
| 2.0 CDTI (210 hp) Diesel | 210 hp480 Nm | 235 hp530 Nm | +25 hp+50 Nm |
All Insignia B engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.