Français
English GB
Opel Astra K 1.6 T (170 hp) remapping
- Fuel
- Petrol
- Years
- 2015 - 2021
- ECU
- Delco E39 / Delco E80
- Method
- Through the OBD port
Stage 1
Opel Astra K 1.6 T (170 hp)
Power
+20 hp +12 %
Torque
+40 Nm +14 %
| Power | Torque | |
|---|---|---|
| Stock | 170 hp | 280 Nm |
| Stage 1 | 190 hp | 320 Nm |
| Gain | +20 hp | +40 Nm |
E85 FlexFuel conversion
Opel Astra K 1.6 T (170 hp)
Power
Torque
| Power | Torque | |
|---|---|---|
| Stock | 170 hp | 280 Nm |
The E85 figures for this engine are not published yet. The conversion lets you run on E85 bioethanol; a question before ordering? Contact us
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Astra K engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 1.4 16v VVT (100 hp) Petrol E85 compatible | 100 hp130 Nm | 110 hp150 Nm | +10 hp+20 Nm | |
| 1.0 Turbo (105 hp) Petrol E85 compatible | 105 hp166 Nm | 130 hp220 Nm | +25 hp+54 Nm | |
| 1.4 Turbo (125 hp) Petrol E85 compatible | 125 hp220 Nm | 175 hp260 Nm | +50 hp+40 Nm | |
| 1.4 Turbo (150 hp) Petrol E85 compatible | 150 hp220 Nm | 175 hp260 Nm | +25 hp+40 Nm | |
| 1.6 T (170 hp) Petrol E85 compatible | 170 hp280 Nm | 190 hp320 Nm | +20 hp+40 Nm | This page |
| 1.6 CDTI (95 hp) Diesel | 95 hp280 Nm | 140 hp350 Nm | +45 hp+70 Nm | |
| 1.6 CDTI (110 hp) Diesel | 110 hp300 Nm | 140 hp350 Nm | +30 hp+50 Nm | |
| 1.6 CDTI (136 hp) Diesel | 136 hp320 Nm | 155 hp370 Nm | +19 hp+50 Nm | |
| 1.6 BiT CDTI (160 hp) Diesel | 160 hp350 Nm | 190 hp400 Nm | +30 hp+50 Nm |
All Astra K engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.