Français
English GB
Porsche Macan 2.0 TFSI (252 hp) remapping
- Fuel
- Petrol
- Years
- 2014 - 2024
- ECU
- Continental Simos18.1 / Continental Simos18.10 / Continental Simos18.2 / Continental Simos18.3 / Continental Simos18.6
- Method
- Through the OBD port
Stage 1
Porsche Macan 2.0 TFSI (252 hp)
Power
+48 hp +19 %
Torque
+70 Nm +19 %
| Power | Torque | |
|---|---|---|
| Stock | 252 hp | 370 Nm |
| Stage 1 | 300 hp | 440 Nm |
| Gain | +48 hp | +70 Nm |
E85 FlexFuel conversion
Porsche Macan 2.0 TFSI (252 hp)
Power
+48 hp +19 %
Torque
+70 Nm +19 %
| Power | Torque | |
|---|---|---|
| Stock | 252 hp | 370 Nm |
| E85 | 300 hp | 440 Nm |
| Gain | +48 hp | +70 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Macan engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| S 2.0 TFSI 16V (237 hp) Petrol E85 compatible | 237 hp350 Nm | 307 hp440 Nm | +70 hp+90 Nm | |
| 2.0 TFSI (252 hp) Petrol E85 compatible | 252 hp370 Nm | 300 hp440 Nm | +48 hp+70 Nm | This page |
| 2.0 TFSI EU6 OPF (T) (265 hp) Petrol E85 compatible | 265 hp400 Nm | 310 hp450 Nm | +45 hp+50 Nm | |
| 3.0 GTS (360 hp) Petrol E85 compatible | 360 hp500 Nm | 390 hp600 Nm | +30 hp+100 Nm | |
| 2.9 V6 Turbo (GTS) (380 hp) Petrol E85 compatible | 380 hp520 Nm | 490 hp700 Nm | +110 hp+180 Nm | |
| 2.9 V6 Turbo (GTS) (440 hp) Petrol E85 compatible | 440 hp550 Nm | 490 hp700 Nm | +50 hp+150 Nm |
All Macan engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.