Français
English GB
Porsche Panamera 971 2.9 V6 Turbo (4S) (440 hp) remapping
- Fuel
- Petrol
- Years
- 2016 - 2023
- ECU
- Bosch MG1CS002
- Method
- Through the OBD port
Stage 1
Porsche Panamera 971 2.9 V6 Turbo (4S) (440 hp)
Power
+50 hp +11 %
Torque
+150 Nm +27 %
| Power | Torque | |
|---|---|---|
| Stock | 440 hp | 550 Nm |
| Stage 1 | 490 hp | 700 Nm |
| Gain | +50 hp | +150 Nm |
E85 FlexFuel conversion
Porsche Panamera 971 2.9 V6 Turbo (4S) (440 hp)
Power
+50 hp +11 %
Torque
+150 Nm +27 %
| Power | Torque | |
|---|---|---|
| Stock | 440 hp | 550 Nm |
| E85 | 490 hp | 700 Nm |
| Gain | +50 hp | +150 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Panamera 971 engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 2.9 V6 Turbo (330 hp) Petrol E85 compatible | 330 hp450 Nm | 510 hp780 Nm | +180 hp+330 Nm | |
| 2.9 V6 Turbo (4S) (440 hp) Petrol E85 compatible | 440 hp550 Nm | 490 hp700 Nm | +50 hp+150 Nm | This page |
| 4.0 V8 Turbo (GTS) (460 hp) Petrol E85 compatible | 460 hp620 Nm | 620 hp800 Nm | +160 hp+180 Nm | |
| 2.9T E-hybrid V6 (462 hp) Hybrid | 462 hp700 Nm | 620 hp800 Nm | +158 hp+100 Nm | |
| 4.0 V8 Turbo (GTS) (480 hp) Petrol E85 compatible | 480 hp620 Nm | 620 hp800 Nm | +140 hp+180 Nm | |
| 4.0 V8 Turbo (550 hp) Petrol E85 compatible | 550 hp770 Nm | 620 hp850 Nm | +70 hp+80 Nm | |
| 2.9T S E-hybrid V6 (560 hp) Hybrid | 560 hp750 Nm | 630 hp850 Nm | +70 hp+100 Nm | |
| 4.0 V8 Turbo (Turbo S) (630 hp) Petrol E85 compatible | 630 hp820 Nm | 700 hp950 Nm | +70 hp+130 Nm | |
| 4.0 Turbo S E-Hybrid (680 hp) Hybrid | 680 hp850 Nm | 750 hp1000 Nm | +70 hp+150 Nm | |
| 4.0 Turbo S E-Hybrid (700 hp) Hybrid | 700 hp870 Nm | 750 hp1000 Nm | +50 hp+130 Nm | |
| 4.0 TDI EU6 (421 hp) Diesel | 421 hp900 Nm | 480 hp1000 Nm | +59 hp+100 Nm |
All Panamera 971 engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.