Français
English GB
Porsche Cayenne 9Y0 4.0 V8 Turbo (550 hp) remapping
- Fuel
- Petrol
- Years
- since 2018
- ECU
- Bosch MG1CS008
- Method
- Through the OBD port
Stage 1
Porsche Cayenne 9Y0 4.0 V8 Turbo (550 hp)
Power
+70 hp +13 %
Torque
+80 Nm +10 %
| Power | Torque | |
|---|---|---|
| Stock | 550 hp | 770 Nm |
| Stage 1 | 620 hp | 850 Nm |
| Gain | +70 hp | +80 Nm |
E85 FlexFuel conversion
Porsche Cayenne 9Y0 4.0 V8 Turbo (550 hp)
Power
+70 hp +13 %
Torque
+80 Nm +10 %
| Power | Torque | |
|---|---|---|
| Stock | 550 hp | 770 Nm |
| E85 | 620 hp | 850 Nm |
| Gain | +70 hp | +80 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Cayenne 9Y0 engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 2.0 TSI 4 motion (265 hp) Petrol E85 compatible | 265 hp350 Nm | 330 hp480 Nm | +65 hp+130 Nm | |
| 3.0 V6 Turbo (340 hp) Petrol E85 compatible | 340 hp450 Nm | 390 hp600 Nm | +50 hp+150 Nm | |
| 3.0 Turbo V6 (353 hp) Petrol E85 compatible | 353 hp500 Nm | 420 hp650 Nm | +67 hp+150 Nm | |
| 2.0 TFSI Hyb. (367 hp) Hybrid | 367 hp | on request | ||
| 2.9 V6 Turbo (4S) (440 hp) Petrol E85 compatible | 440 hp550 Nm | 490 hp700 Nm | +50 hp+150 Nm | |
| 4.0 V8 Turbo (GTS) (460 hp) Petrol E85 compatible | 460 hp620 Nm | 620 hp800 Nm | +160 hp+180 Nm | |
| 3.0T E-hybrid V6 (462 hp) Hybrid | 462 hp700 Nm | 520 hp800 Nm | +58 hp+100 Nm | |
| 3.0T V6 E-Hybrid (470 hp) Hybrid | 470 hp | on request | ||
| 4.0 V8 Turbo (S) (474 hp) Petrol E85 compatible | 474 hp600 Nm | 620 hp800 Nm | +146 hp+200 Nm | |
| 4.0 V8 Turbo (GTS) (500 hp) Petrol E85 compatible | 500 hp660 Nm | 620 hp800 Nm | +120 hp+140 Nm | |
| 3.0T V6 S E-Hybrid (519 hp) Hybrid | 519 hp | on request | ||
| 4.0 V8 Turbo (550 hp) Petrol E85 compatible | 550 hp770 Nm | 620 hp850 Nm | +70 hp+80 Nm | This page |
| 4.0 V8 Turbo (GT) (640 hp) Petrol E85 compatible | 640 hp850 Nm | 700 hp950 Nm | +60 hp+100 Nm | |
| 4.0 Turbo S E-Hybrid (680 hp) Hybrid | 680 hp850 Nm | 750 hp1000 Nm | +70 hp+150 Nm |
All Cayenne 9Y0 engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.