Français
English GB
Volkswagen Touareg III (CR) 3.0 V6 Turbo (340 hp) remapping
- Fuel
- Petrol
- Years
- since 2018
- ECU
- Bosch MG1CS002
- Method
- Through the OBD port
Stage 1
Volkswagen Touareg III (CR) 3.0 V6 Turbo (340 hp)
Power
+50 hp +15 %
Torque
+150 Nm +33 %
| Power | Torque | |
|---|---|---|
| Stock | 340 hp | 450 Nm |
| Stage 1 | 390 hp | 600 Nm |
| Gain | +50 hp | +150 Nm |
E85 FlexFuel conversion
Volkswagen Touareg III (CR) 3.0 V6 Turbo (340 hp)
Power
Torque
| Power | Torque | |
|---|---|---|
| Stock | 340 hp | 450 Nm |
The E85 figures for this engine are not published yet. The conversion lets you run on E85 bioethanol; a question before ordering? Contact us
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Touareg III (CR) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 2.0 TFSI (252 hp) Petrol E85 compatible | 252 hp370 Nm | 300 hp440 Nm | +48 hp+70 Nm | |
| 2.0 TSI 4 motion (265 hp) Petrol E85 compatible | 265 hp | on request | ||
| 3.0 V6 Turbo (340 hp) Petrol E85 compatible | 340 hp450 Nm | 390 hp600 Nm | +50 hp+150 Nm | This page |
| 3.0 V6 e-Hybrid (381 hp) Hybrid | 381 hp600 Nm | 540 hp850 Nm | +159 hp+250 Nm | |
| 3.0T V6 E-Hybrid (456 hp) Hybrid | 456 hp | on request | ||
| 3.0T V6 E-Hybrid (462 hp) Hybrid | 462 hp700 Nm | 520 hp800 Nm | +58 hp+100 Nm | |
| 3.0 TDI EU6 (231 hp) Diesel | 231 hp550 Nm | 350 hp720 Nm | +119 hp+170 Nm | |
| 3.0 TDI EU6 (286 hp) Diesel | 286 hp600 Nm | 350 hp700 Nm | +64 hp+100 Nm | |
| 4.0 TDI EU6 (421 hp) Diesel | 421 hp900 Nm | 480 hp1000 Nm | +59 hp+100 Nm |
All Touareg III (CR) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.
Indicative figures measured on a well-maintained stock vehicle: they may vary with engine condition, fuel and measuring conditions. A remap changes the vehicle's characteristics: remember to inform your insurer.